2500mm PLC 5mm Reinforced Mesh Welding Machine

Width 2500mm Panasonic PLC Wire Diameter 5-12mm Reinforcing Mesh Welding Machine

Reinforcing Mesh Welding Machine Introduction: 

Reinforcing Mesh Welding Machine adopts power electronic synchronous control technology, welding time and separate control welding are managed by automatic control system, human-machine interface, intelligent operation, humanization. Separate the welding transformer to reduce the requirement of power transformer.

Reinforcing Mesh Welding Machine Features:

1. Control system Panasonic PLC automatic control system, combined with Weinview touch screen, can directly input and display equipment operating parameters, intelligent and easy to operate.

2. Weft wire hopper: the stepper motor drives the disk-type device to automatically drop wires, and the hopper has a large capacity of storing wires max up to 1.5 tons. When there is no wire in the hopper, the equipment will automatically stop running.

3. Diameter wire feeding mechanism: Mitsubishi servo motor is equipped with planetary reducer to drive pneumatic compression wire feeding device to send diameter wire to the welding position. The equipment is automatically welded.

4. Mesh pulling mechanism: Mitsubishi servo motor supporting planetary reducer drives pneumatic clamping mesh pulling device to ensure the stability of the system and the standard size of the welded mesh.Automatic reciprocating mesh drawing can realize the production of lengthening size mesh.

5. Water-cooled welding electrodes and a new type of special transformer for water-cooled welding mesh with epoxy resin are adopted, which is smaller in size and higher in safety and reliability than traditional transformers.

6. Low-voltage electrical appliances are made of Schneider, Tianzheng, Mingwei and other well-known brands to ensure the efficient and stable operation of the equipment.

7. The reinforcing mesh welding machine will stop working automatically if there is no cross wires in hopper device.

8. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.

9. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.

10. The mesh pulling system in cycle is automatically calculated, no need manual setting. The mesh pulling car can be back to origin automatically after finishing the pulling.

11. The reinforcing mesh welding machine is equipped with 12 PCS water cooled transformers. Each welding transformer is 150KVA.

Reinforcing Mesh Welding Machine Technical parameters:

Reinforcing Mesh Welding Machine Application:

Reinforcing mesh is used in industrial and civil housing beam and column floor, roof, wall, concrete pavement, bridge deck pavement, airport runway, tunnel lining, box culvert, wharf floor, precast components and other fields.

Reinforcing Mesh Welding Machine Packing: