Pre Cut 2500A 12PCS Reinforcing Mesh Welding Machine

Mesh Length 12m Expressway Construction Mesh Reinforcing Mesh Welding Machine

Reinforcing Mesh Welding Machine Introduction:

The reinforcing mesh welding machine is complete equipment for welding wire mesh.Which is manufactured by our company based on learning foreign advanced experience and technology in addition to actual demands in the international market. The reinforcing mesh welding machine can perform high quality cross-welding for cold-rolling rebar, hot-rolling rebar, round bar. The reinforcing mesh welding machine can weld max wire diameter 12mm. Welding spots firm. The reinforcing mesh is widely used in expressway construction,road mesh.bridge construction mesh etc. 

Reinforcing Mesh Welding Machine Features:

1. The reinforcing mesh welding machine cent-control and welding time are composed of PLC program system . The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press at one time, separate welding. Surely,if the power supply is enough big,it can also adopt the welding at the same time.

2. Line wires adopt per-cut wires,line wires are put by hand based on the positioning device,then automatic tightening and send the down electrodes by sending line wires car installed with the step motor; When the mesh is being welded, line wires of the next mesh can be placed, which greatly shortens the working interval time of the machine.

3. Cross wires also adopt pre-cut wires,the cross wire hopper obtains wires by motor driver devices, electric magnetic increase feeding device auto-feeding the wefts into the preparation area of the device from the large storing hopper(storage up to 1000kg),it is installed in the removable pulling mesh rack,very convenient to adjust and maintain.

4. Our transformers adopts big power at 200KVA every one,which can ensure the welding quality in good condition and adopt water cooling system,so the machine can work for 24 hours continuously.

5. Pulling mesh way adapts servo motor back and forward according to the setting parameters into the touch screen.

6. The reinforcing mesh welding machine adopts 15KW electromagnetic brake motor for the line wire and cross wire welding to provide stable and flexiable welding pressure,welding smooth,less splash,welding speed fast and has a very good braking function,to ensure the welding better control the inertia of the crankshaft movement,so that make sure the mesh hole size error to smallest. 

7. The reinforcing mesh welding machine adopts cross wire hopper deivice.The cross wire is fall from the special hopper.The hopper can load max 1.5 tons rebars. reduce the intensity of frequent feeding for the workers, 

8. The reinforcing mesh welding machine has cross wire detection function, when the cross wire has not fall to the welding position. The machine stop working automatically. 

9. The pulling mesh car adopts special hook to clamp the cross wire by air cylinder and is driven by the servo motor back and forward.For large and mesh length max 12m production to save the workshop space. 

10. The pulling mesh car rack frame and cross wire falling hopper can be moved to the pulling mesh direction space for the machine adjustment.Greatly enhance the adjustment efficiency when change the line wire space by manual. The function is very easy to operate. 

11. The upper and down welding electrodes use special CuCrZr, the electricity conductivity,hardness and wear resistance are all very good. The changeover time of the line wire space is about 30 minutes to be finished. The up and down welding electrodes are water cooling system. Thus reduce the heat of the upper and down electrodes when the machine is working. can working 24 hours continously.The service life for long time.

12. The reinforcing mesh welding machine is equipped with water cooling tower. The water cooling tower is mainly to reduce the temperature of the circulating water.And to cool the upper and down welding electrodes and welding transformer.

Reinforcing Mesh Welding Machine Technical Parameters:

Reinforcing Mesh Welding Machine Application:

The reinforcing mesh is widely used in cement setting engineering of highway pavement, in bridge engineering and in tunnel lining.

Reinforcing Mesh Welding Machine Packing:

Reinforcing Mesh Welding Machine Photos: