-
Wire Mesh Welding Machines
-
Reinforcing Mesh Welding Machine
-
Fence Mesh Welding Machine
-
Mesh Panel Welding Machine
-
Fixed Knot Fence Machine
-
Construction Mesh Welding Machine
-
Roll Mesh Welding Machine
-
Welded Wire Mesh Machine
-
Steel Grating Welding Machine
-
Razor Barbed Wire Machine
-
Chain Link Fence Making Machine
-
Steel Wire Drawing Machine
-
Wire Straightening And Cutting Machine
CE 4.0-8.0mm Fence Wire Mesh Panel Welding Machine 415Volt Precise Control
Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Name | Wire Mesh Panel Welding Machine | Certification | CE |
---|---|---|---|
Welding Speed | 40-60 Times/minute | Line Wire Space | 50-250mm |
Cross Wire Space | 50-300mm | Width Of Mesh | 2500mm |
Length Of Mesh | 6000mm | Wire Diameter | 4-8mm |
Weight | 5500KG | Voltage | 220V/380V/415V/440V |
Dimension | 7500*3200*2100mm | Control System | By PLC + Touch Screen |
Highlight | Wire Mesh Panel Welding Machine 415Volt,Wire Mesh Panel Welding Machine precise control,fence Mesh Welding Machine Precise Control |
Wire Diameter 4-8mm Fence Protection Wire Mesh Panel Welding Machine
Introduction of Wire Mesh Panel Welding Machine:
The wire mesh panel welding machine, also called BRC mesh welding machine, Construction mesh welding machine.
The wire mesh welding machine is used to make steel rebar mesh, road mesh, building construction mesh, etc. With more-than-20years experience in design and manufacture, our wire mesh welding machine is featured by high capacity, easy operation, and precise control.
Features of Wire Mesh Panel Welding Machine:
1. Adopts electrical synchronous control technique. Both separate-phase welding and welding time are controlled by digital and integrated electric circuit. This operation is accurate and stable. Firm welded spot is firm and without welded tracks.
2. The input front-panel is touch screen. The operation is more intelligent and reasonable.
3. The line wire and the cross wire are pre-straightened and pre-cut.
4. Wire mesh panel is pulled by the servo motor automatically.
5. Line wire feeding device save more welding time. The cross wire feeds from the hopper automatically.
6. The transformer adopts water-cooling system. The water cooling system prolongs the service time of transformer.
7. The upper electrodes and down electrodes square. The size 30x30mm.
8. The welding wire is accurate and the welding points are firm for the big pressure.
9. Mesh pulling system is controlled by servo-motor that adopts elastic tension and opening positioning mesh, which improves the precision of mesh opening size.
10.The machine equips with 9 pieces of typical and efficient water-cooling transformers, 160KVA*9(51 pcs of water cooling electrodes) ——every 6 welding heads need a water cooling transformer.
11. Wire feeding way:The longitudinal wires and cross wires should be pre-straightened and pre-cut. The longitudinal wires should be inserted into the slot tunnel by manual work.
12. Material:Suitable for low carbon iron wire, deformed bar, round bar black annealed wire or galvanized (cold galvanized, hot galvanized) processing.
13. Product pulling system the mesh is pulled by gearing system below the mesh.
Advantages of Wire Mesh Panel Welding Machine:
1. Line wire feeding device aligning and feeding wires automatically, improves the efficiency by 1/3 and saves human labor.
2. Mesh drawing device driven by servo motor cycles automatically. Mesh drawing is more high-speed and accurate. It’s more efficient and saving labor.
3. Delta PLC control system is imported from Taiwan. Other control program and motors all use domestic famous brands. All assures the accuracy of control system.
4. Paddle and ladder design assure the operation more safe and convenient.
5. 30 kinds of different mesh size can be welded on the same panel.
Technical Parameters of Wire Mesh Panel Welding Machine:
Model | DX-GWCD-2000 | DX-GWCD-2500 |
Wire diameter | 4-8mm | 4-8mm |
Welding capacity | 150KVA*6PCS | 150KVA*9PCS |
Welding speed | 40-60 times/minute | 40-60 times/minute |
Hole size | 50*50mm-250*250mm | 50*50mm-250*250mm |
Width of mesh | 2000mm | 2500mm |
Main motor | 7.5kw | 11kw |
Machine weight | 5000kg | 5500kg |
Labor cost | Two persons | Two persons |
Floor space | 20*6m | 20*6m |
Applications of Wire Mesh Panel Welding Machine:
Wire mesh panel welding machine is used to produce mesh for guard rail of road, railway, hills, fencing, mesh for casting of building roofs.
Loading Photos of Wire Mesh Panel Welding Machine:
Photos of Wire Mesh Panel Welding Machine: