Pneumatic Hook Pull Mesh Reinforcing Mesh Panel Welding Machine 11KW
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Reinforcing Mesh Panel Welding Machine
|Longitudinal Wire Diameter
|Cross Wire Diameter
|Max. Wire Diameter
|Longitudinal Wire Space
|Cross Wire Space
|50-70 Times Per Min
|Number Of Welding Electrode
Mesh Panel Welding Machine 11KW,
Reinforcing Mesh Welding Machine 11KW,
Pneumatic Hook Mesh Panel Welding Machine
Mesh Width 2m Pneumatic Hook Pull Mesh Reinforcing Mesh Panel Welding Machine
Introduction of Reinforcing Mesh Panel Welding Machine:
Reinforced mesh panel welding machine adopts power electronic synchronous control technology, welding time and separate control welding are managed by automatic control system, human-machine interface, intelligent operation, humanization. Separate the welding transformer to reduce the requirement of power transformer.
Features of Reinforcing Mesh Welding Panel Machine:
1. Control system Mitsubishi or Panasonic PLC automatic control system, combined with Weinview touch screen, can directly input and display equipment operating parameters, intelligent and easy to operate.
2. Cross wire hopper: the stepper motor drives the disk-type device to drop wires automatically, and the hopper has a large capacity of storing wires max up to 1.5 tons. When there is no cross wire in the hopper, the equipment will stop running automatically.
3. Mesh pulling mechanism: servo motor supporting planetary reducer drives pneumatic clamping mesh pulling device to ensure the stability of the system and the standard size of the welded mesh.Automatic reciprocating mesh drawing can realize the production of lengthening size mesh.
4. Water-cooled welding electrodes and a new type of special water-cooling transformer welding mesh with epoxy resin are adopted, which is smaller in size and higher in safety and reliability than traditional transformers.
5. Low-voltage electrical appliances are made of Schneider, well-known brands to ensure the efficient and stable operation of the equipment.
6. The reinforcing mesh panel welding machine will stop working automatically if there is no cross wires in hopper device.
7. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.
8. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.Very easy and convenient to operate.
9. The mesh pulling system is automatically calculated in cycle.No need manual setting. The mesh pulling car can be back to origin automatically after finishing the pulling mesh.
Technical Parameters of Reinforcing Mesh Panel Welding Machine:
|Longitudinal wire type
|Cross wire type
|50-70 times per min
|Welding transformer capacity
|Main motor power
|from 50*50mm to 250*250mm
|PLC and touch screen
|Pulling mesh system
Applications of Reinforcing Mesh Panel Welding Machine:
Widely used in railway, highway, bridge high-rise buildings, stadium, court, airport, workshop isolation mesh welding, can be customized according to customer needs.
Photos of Reinforcing Mesh Panel Welding Machine: