Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine 75kw
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||Cold Rolling Ribbed Steel Bar Machine / Wire Drawing Machine||Inlet Wire Diameter||Maximum 12mm|
|Outlet Wire Diameter||Minimum 4mm||Main Motor||75kw|
|Winding Wire Motor||11kw||Coil Wire Weight||2 Tons|
|Production Speed||120m Per Min||Mode Of Adjustment||Speed Inverter|
|Installation Length||30m||Total Weight||6.8 Tons|
|Mode Of Lubrication||Wire Drawing Powder||Labor Cost||Two Persons|
Steel Wire Drawing Machine 75kw,
Steel Bar Machine 75kw,
Cold Rolling Steel Bar Machine
Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine
Introduction of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
The cold rolling steel bar ribbed machine is to roll surface of steel round bar to form three crescent sides.
Raw material is hot-rolled low carbon steel round bar.
Main Features of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
1. Gearbox Reducer, large torque, low noise, durable.
2. Advanced frequency inverter technology, can save 40-60% of electricity consumption.
3. The line speed can be up to 90 meters per minute, improve production efficiency.
4. Technology applied on the vibration aging process, eliminating the pre-stressing.
Rolling mill and speed:
If the reduced diameter is less then 1mm, only need to use single rolling mill-6pcs rolling wheels. (For example, inlet round wire 8.5-9mm, outlet ribbed wire 8mm.) But the wire reducing and ribbing are doing on one rolling mill machine, the rolling speed is max.90m/min.
If the reduced diameter is more than 1mm, less than 2mm, need to use two rolling mills-12pcs rolling wheels. (For example, inlet round wire 9-10mm, outlet ribbed wire 8mm.) The wire reducing and ribbing are doing at 2 rolling mill machines, the rolling speed can be up to max.120m/min.
Raw material–Spool off–Sheller–Dry Lubrication–NO.1 rolling mill machine for reducing–Coiling.
Technical Parameters of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
|Raw material inner diameter||800 mm|
|Raw material outside diameter||1,200 mm|
|Raw material height||1,700 mm|
|Raw material||Max 2,000 kg|
|Control technical||Touch screen + PLC+ Encoder|
|Raw material diameter||Φ5.5-14mm|
|Finished ribbed bar diameter||Φ5-12mm|
|Ribs bar measurement length||1-12m|
|Speed adjusting way||Frequency inverter|
|Cut off error||±5mm|
|Cutting way||Servo cutting|
|Servo cutting rate||18KW|
|Ribs rolling mill material||Tungsten carbide|
|rolling mill diameter||Ф210mm|
|Cooling way||Water cooling|
|Butt welding machine||1 unit|
|Air compressor||0.18 m³/min @ 8 bar|
|Rolling press times||2+1|
|Rolling mill adjusting way||Motor give pressure|
|Power consumption:||10kw per ton|
|Installation & training time||10-15 days|
Applicatios of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine:
This production line is mainly to make 5-10mm reinforcing steel bars with three-side crescent shape ribs. The finished product is widely used in highway, road, city planning and construction works.
Photos of Cold Rolling Ribbed Steel Bar Machine / Steel Wire Drawing Machine